Starflow NRT Ultrasonic Leaflet

	Internet Enabled Starflow Ultrasonic Flow Meter Key Features Integrated NRT allows real-time data reporting over the internet Integrated NRT allows real-time configuration changes over the internet Records Flow in streams, open channels and part-filled pipes. Velocity, depth, computed flow and temperature Integrated Neon Remote Terminal (NRT) logger for local storage Easy to install, no weir or flume required. New Level sensor New velocity filter for more accurate readings Optional Flow Display for on site viewing. Options for wireless and web data collection SDI-12 Compatible Rain gauge input low cost The ultrasonic Doppler instrument is a compact, easy to use system for measuring the velocity and depth of water in rivers and streams, open drainage channels and large pipes. It is suitable for use in a wide range of water qualities ranging from sewerage and waste water to clean streams, potable water, and even sea water. The instrument measures forward and reverse flow conditions and may be programmed to compute flow rate and total flow in pipes and open channels. The newest model, consists of a new depth sensor and a new velocity algorithm in addition to all the previous features. The ultrasonic transducer assembly is profiled to reduce flow disturbance and signal electronics. It is designed to be placed at (or near) the bottom of the water channel for upstream measurement. A single cable connects the instrument to a 12V DC power source. Water velocity is measured by the ultrasonic Doppler principle which relies on suspended particles or small air bubbles in the water to reflect the ultrasonic detector signal. The instrument will not operate in very clean, degassed water. Water depth is gauged by a hydrostatic pressure sensor, referenced to atmospheric pressure through the vented power and signal cable. Specifications. Velocity Range: 21 mm/s to 4500mm/s bi-directional Accuracy: 2% of measured velocity Resolution: 1mm/s Depth Range:0 to 5 m in two ranges Resolution Range 0 to 2.5 M: 2.5mm Range 2.5 to 5.0 M: 5.0 mm Accuracy ± 0.25% Temperature Range: -17° to 60°C Resolution: 0.1°C Flow Computation: Flow rate, totalised flow Channel type: Pipe, open channel, natural stream, Integrated MicroLogger Storage Memory: 100KB, CMOS RAM Log interval: Programmable, five seconds to one week SDI-12: 1200 bps instrument channel Communication: RS-232, 300-38400 bps Control: CMOS output trigger (water sampler) General Power source: External battery 12V DC Power usage: 11.5 to 15V DC, 50µA standby, 200mA active, 90mA communications Operating Temp: 0°C to 60°C water temperature Material: PVC body, stainless steel mounting plate Dimensions: 290mm L x 70mm W x 30mm H Weight: 1kg (2kg with 15m cable)Cable: 15 metre, 9 way vented, <<SQL>> compatible

Key Features

Integrated NRT allows real-time data reporting over the internet
Integrated NRT allows real-time configuration changes over the internet
Records Flow in streams, open channels and part-filled pipes.
Velocity, depth, computed flow and temperature
Integrated Neon Remote Terminal (NRT) logger for local storage
Easy to install, no weir or flume required.
New Level sensor
New velocity filter for more accurate readings
Optional Flow Display for on site viewing.
Options for wireless and web data collection
SDI-12 Compatible
Rain gauge input
low cost

The ultrasonic Doppler instrument is a compact, easy to use system for measuring the velocity and depth of water in rivers and streams, open drainage channels and large pipes. It is suitable for use in a wide range of water qualities ranging from sewerage and waste water to clean streams, potable water, and even sea water. The instrument measures forward and reverse flow conditions and may be programmed to compute flow rate and total flow in pipes and open channels.
The newest model, consists of a new depth sensor and a new velocity algorithm in addition to all the previous features. The ultrasonic transducer assembly is profiled to reduce flow disturbance and signal electronics. It is designed to be placed at (or near) the bottom of the water channel for upstream measurement. A single cable connects the instrument to a 12V DC power source.

Water velocity is measured by the ultrasonic Doppler principle which relies on suspended particles or small air bubbles in the water to reflect the ultrasonic detector signal. The instrument will not operate in very clean, degassed water. Water depth is gauged by a hydrostatic pressure sensor, referenced to atmospheric pressure through the vented power and signal cable.

Specifications.

Velocity
Range: 21 mm/s to 4500mm/s bi-directional
Accuracy: 2% of measured velocity
Resolution: 1mm/s
Depth
Range:0 to 5 m in two ranges
Resolution Range 0 to 2.5 M: 2.5mm
Range 2.5 to 5.0 M: 5.0 mm
Accuracy ± 0.25%
Temperature
Range: -17° to 60°C
Resolution: 0.1°C
Flow
Computation: Flow rate, totalised flow
Channel type: Pipe, open channel, natural stream,
Integrated MicroLogger
Storage Memory: 100KB, CMOS RAM
Log interval: Programmable, five seconds to one week
SDI-12: 1200 bps instrument channel
Communication: RS-232, 300-38400 bps
Control: CMOS output trigger (water sampler)
General
Power source: External battery 12V DC
Power usage: 11.5 to 15V DC, 50µA standby, 200mA active, 90mA communications
Operating Temp: 0°C to 60°C water temperature
Material: PVC body, stainless steel mounting plate
Dimensions: 290mm L x 70mm W x 30mm H
Weight: 1kg (2kg with 15m cable)Cable: 15 metre, 9 way vented, <<SQL>> compatible


Accessories

Internet Enabled Starflow Ultrasonic Flow Meter